Rage3D Discussion Area

Rage3D Discussion Area (http://www.rage3d.com/board/index.php)
-   General Hardware (http://www.rage3d.com/board/forumdisplay.php?f=11)
-   -   -Post pics of your computer- (http://www.rage3d.com/board/showthread.php?t=33744307)

demo May 27, 2019 04:59 AM

Quote:

Originally Posted by aviphysics (Post 1338133883)
Who needs Ray Tracing when you have Vector Tracing.

What the hell man that is sweet :drool:

Trunks0 Jun 29, 2019 08:27 PM

Couple pics of my current, and definitely dated, setup.




Evileh Jun 30, 2019 08:11 AM

that case is so close to the wall all the heat out the back is just bouncing right back at it.

Mangler Jun 30, 2019 08:13 AM

The exhaust on that case is in the roof.

Trunks0 Jun 30, 2019 01:19 PM

This might give a better perspective... and made me realize I need to dust lol


But everything is angled so it exhausts out the top

0091/2 Jun 30, 2019 07:40 PM

Would that case have a problem installing wi-fi antennas? Is the top removable?

Trunks0 Jun 30, 2019 09:07 PM

I might, depending on the antenna, though you can always extend those to get around it. It is removable, but kinda ugly without the cover.

Evileh Jul 1, 2019 10:16 AM

That is the weirdest case design ever lol

Mangler Jul 1, 2019 10:33 AM

The design works though, when it comes to air cooled builds, there are few cases that can beat the raven/fortress.

Hapatingjaky Jul 1, 2019 11:44 AM

Silverstone used to make some of the best 90 degree oriented chassis. But they fell from grace. The last good case form them was the TJ11. Use it for a server system at work.

It still has some of the best cooling around due to the exhaust method of the case. You can also fit dual 480 rads in the bottom. I had an XSPC setup in there, 480 rad in the bottom with a front-bat res+pump. Best cooling setup I ever had.

Omega53 Jul 2, 2019 07:03 AM




Trunks0 Jul 2, 2019 08:34 PM

That is sick, I love those fans. They just offer so much for lighting awesomeness.

0091/2 Jul 3, 2019 10:15 PM

Can the RGB be turn off?

Megaman Jul 3, 2019 10:22 PM

Quote:

Originally Posted by 0091/2 (Post 1338140876)
Can the RGB be turn off?

Yes.





0091/2 Jul 3, 2019 10:24 PM

Lighting off with the PC running?:bleh:

Megaman Jul 3, 2019 10:29 PM

Quote:

Originally Posted by 0091/2 (Post 1338140881)
Lighting off with the PC running?:bleh:


Of course. It's all software controlled

Dungeoncrawler Jul 4, 2019 02:33 AM

Love this thread - great pics everyone :up:

aviphysics Jul 7, 2019 08:29 PM

Quote:

Originally Posted by Trunks0 (Post 1338140216)
Couple pics of my current, and definitely dated, setup.

Which trackball is that?

aviphysics Jul 7, 2019 08:31 PM

Quote:

Originally Posted by demo (Post 1338135073)
What the hell man that is sweet :drool:

It is my Vectrex station. Made that cabinet shortly before the pic. Before that, it lived on my computer desk and wasn't getting as much love from the kids and visitors as it deserves.

Trunks0 Jul 8, 2019 01:14 AM

Quote:

Originally Posted by aviphysics (Post 1338141532)
Which trackball is that?

Elecom M-HT1URBK wired, or just Elecom HUGE. I got it to replace my Microsoft Explorer Trackball as another one of those are now insanely expensive. I also wanted something different from the Logitech Marble mice I'd used for years. So this had tons of buttons, Omron switches, the scroll wheel both clicks n' tilts to the sides and I can adjust the DPI on the fly. Seemed like a good replacement.

Elecom's website has some pretty hilarious engrish
https://www.elecom.co.jp.e.gj.hp.tra...M-HT1URBK.html

Quote:

Originally Posted by Elecom M-HT1URBK website
A feeling of chastity ball beyond imagination that large truck ball of 52mm in diameter realizes! Track ball mouse "HUGE" of forefinger, the middle finger operation type equipped with palm rest which reduced burden to wrist in long-time PC work.

And before you ask, I snagged it on Amazon. Where it is pretty affordable to top it all off.

Megaman Jul 8, 2019 01:18 AM

Quote:

Originally Posted by Trunks0 (Post 1338141556)
Elecom M-HT1URBK. I got it to replace my Microsoft Explorer Trackball as those are now insanely expensvie and I wanted something different from the Logitech Marble mouse I'd used for years. Elecom's website has some pretty hilarious engrish.

https://www.elecom.co.jp.e.gj.hp.tra...M-HT1URBK.html


Support ball made of population ruby selected carefully.

Also....We can easily remove ball from hole of the back side and are design that is easy to maintain ball and internal ball tray.

aviphysics Jul 8, 2019 08:52 PM

Quote:

Originally Posted by Megaman (Post 1338141557)
Support ball made of population ruby selected carefully.

Also....We can easily remove ball from hole of the back side and are design that is easy to maintain ball and internal ball tray.

Chastity ball is just the feature I have been looking for in my pointing device.

Omega53 Jul 9, 2019 03:20 PM



Added an AIO and new PSU

Greasy Jul 9, 2019 03:53 PM

Nice build man. :up:

Omega53 Jul 9, 2019 04:57 PM

Quote:

Originally Posted by Greasy (Post 1338141806)
Nice build man. :up:

Thanks! Last ones I promise. Cleaned up some wiring. I need to grab some Cablemod Pro cables for the GPU. The ones that come with the RM750X are garbage.






demo Jul 10, 2019 08:36 AM

Looks great man. I like that case, think I might get one.

Omega53 Jul 11, 2019 07:34 PM



Replaced the GPU and Motherboard PSU cables. Looking much better now.

Greasy Jul 11, 2019 09:42 PM

Quote:

Originally Posted by demo (Post 1338141888)
Looks great man. I like that case, think I might get one.

Seems like a 100% neg pressure design. Unless you're using the fans at the bottom, but you need to get it off the carpet before you do that.

I do love the layout of the case though.

Omega53 Jul 12, 2019 06:56 AM

Quote:

Originally Posted by Greasy (Post 1338142239)
Seems like a 100% neg pressure design. Unless you're using the fans at the bottom, but you need to get it off the carpet before you do that.

I do love the layout of the case though.



I added a table. Next is to have 3 intake fans on the bottom and I'm finally done!!!

Mangler Jul 12, 2019 07:02 AM

Why don't you just use the side fans as the intake?

I think gamersnexus tried out all different fan configurations and that was the best option for both cpu and gpu temps.


All times are GMT -5. The time now is 04:43 AM.

Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All trademarks used are properties of their respective owners. Copyright 1998-2011 Rage3D.com