Rage3D Discussion Area

Rage3D Discussion Area (http://www.rage3d.com/board/index.php)
-   General Hardware (http://www.rage3d.com/board/forumdisplay.php?f=11)
-   -   -Post pics of your computer- (http://www.rage3d.com/board/showthread.php?t=33744307)

Nunz Feb 12, 2012 11:22 PM

You know.. I never think of the easy solution.
I swear, I forget that this monitor is 120hz in 2D sometimes..

Is this what getting older feels like? ****.
BTW Demo.. are you running any type of extravagant AA or anything? I can't seem to get AA forced through nvidia inspector, it just ignores everything.. and gives me that same 60 FPS average.
Framelimiter works great, thanks.

demo Feb 13, 2012 12:45 AM

In Shogun I'm using the SMAA injector plus 4xMSAA in game and 2xtrSSAA in Nv CP iirc.

KAC Feb 13, 2012 04:12 AM

Quote:

Originally Posted by Meteor|WAR (Post 1336839844)
I am actually waiting to see what Nvidia has to offer with their Kepler GPUs.



No offense to anyone else here that's an enthusiast, just needed to give KAC a jab back for that one.:) FFS, I just scrounge together nearly $1000 over the past 3 months and he comes in and says "well where's the new video card" like its not good enough for him. Like I give a ****. Asshat.:lol:

Way to be a db about this thing. Your rig is screaming for a new video card and I just pointed out the obvious.

Meteor_of_War Feb 13, 2012 08:15 AM

Quote:

Originally Posted by Seyiji (Post 1336840122)
GK104 is a Kepler chip :lol:

Yeah, I was agreeing that is indeed what I am holding out for. Sorry if I didn't come off clear on that.

Quote:

Originally Posted by KickAssCop (Post 1336840318)
Way to be a db about this thing. Your rig is screaming for a new video card and I just pointed out the obvious.

Nah, you were being the db... Instead of "nice upgrade" you chose to go the route of "heh, where's the video card?" Condescending.

But thanks for playing.

Seyiji Feb 13, 2012 08:39 AM

Quote:

Originally Posted by Meteor|WAR (Post 1336840411)
Yeah, I was agreeing that is indeed what I am holding out for. Sorry if I didn't come off clear on that.

I figured after I thought about it.
I'm also waiting for Kepler :up:

Meteor_of_War Feb 14, 2012 06:17 PM

I knew I recognized it, AdamK47 has the rig of the day on Hard|OCP:

http://hardocp.com/news/2012/02/13/h_reader_rig_day

AdamK47 Feb 18, 2012 05:09 PM

Quote:

Originally Posted by Meteor|WAR (Post 1336842168)
I knew I recognized it, AdamK47 has the rig of the day on Hard|OCP:

http://hardocp.com/news/2012/02/13/h_reader_rig_day

Wow! I didn't even know they posted it.

Meteor_of_War Feb 18, 2012 08:24 PM

Quote:

Originally Posted by AdamK47 (Post 1336846149)
Wow! I didn't even know they posted it.

So I take it you didn't win anything.:lol:

AdamK47 Feb 19, 2012 02:26 PM

Quote:

Originally Posted by Meteor|WAR (Post 1336846267)
So I take it you didn't win anything.:lol:

I won public ridicule.

I simply posted in the "Post pics of your rig" thread not thinking that it would be on the fron't page later on.

Roadhog Feb 19, 2012 02:27 PM


nycdarkness Feb 19, 2012 02:45 PM

Quote:

Originally Posted by Roadhog_ (Post 1336846689)

Nice rig. Glad to see you finally went with water.

shadow001 Feb 19, 2012 09:16 PM

The beast has awoken, but not quite ready yet as i have more wiring work to do, still it took me amost 3 days of work to get it to this point, wich included a lot of mesuring and modding to simply be able to fit everything....Pictures come first:





The 4 HD7970's, water cooled and ready to rock.....:D





2 extra punps besides the one already built into the reservoir itself located on a 5 1/4 bay, so that makes 3 pumps not just for extra flow but also redundancy.





The modifed radiator sandwich this time with 5 fans and i replaced a pair of 120mm by a pair of 140 mm that have high static pressure, and also the flow is improved because i removed some 90* fittngs.






It's bled and still got some detailing work to do on the harness, but the brunt of the work is done.....I'll post a final picture once it's all really finished and nice and clean.

tehpikachu Feb 19, 2012 10:55 PM




Meteor_of_War Feb 19, 2012 11:28 PM

Holy **** @ shadow001.:eek:

:up::up::up:

shadow001 Feb 20, 2012 12:08 AM

Quote:

Originally Posted by Meteor|WAR (Post 1336846965)
Holy **** @ shadow001.:eek:

:up::up::up:



It'll look even cleaner when i'm really done with it, as i'm seriously thinking about sleeving all the wiring black to match the interior finish and painting the blue ray drives housing black as well as the reservoir pump unit on the 5 1/4 bay, but it's pretty time intensive and isn't somthing you do in a few hours....:lol:

CurrentlyPissed Feb 20, 2012 12:24 AM

I feel shitty after following up after Shadow =(. But here's the 7950s installed.







shadow001 Feb 20, 2012 12:28 AM

Very nice and clean setup CP and don't worry about little old me, i just have this knack to fill out a case with hardware no matter how big it is....:lol:

logical Feb 20, 2012 02:02 AM

2 grand in video cards, whats the total system cost? :drool::drool:

KAC Feb 20, 2012 03:02 AM

Quote:

Originally Posted by shadow001 (Post 1336846892)
The beast has awoken, but not quite ready yet as i have more wiring work to do, still it took me amost 3 days of work to get it to this point, wich included a lot of mesuring and modding to simply be able to fit everything....Pictures come first:





The 4 HD7970's, water cooled and ready to rock.....:D





2 extra punps besides the one already built into the reservoir itself located on a 5 1/4 bay, so that makes 3 pumps not just for extra flow but also redundancy.





The modifed radiator sandwich this time with 5 fans and i replaced a pair of 120mm by a pair of 140 mm that have high static pressure, and also the flow is improved because i removed some 90* fittngs.






It's bled and still got some detailing work to do on the harness, but the brunt of the work is done.....I'll post a final picture once it's all really finished and nice and clean.

Hey man, I jizzed my shorts... :drool: :up:

BababooeyHTJ Feb 20, 2012 04:57 AM

How did you sandwich the radiators?

demo Feb 20, 2012 05:22 AM

Looks like he just screwed the fans to both rads either side?

And nice looking rig shadow :up:

aRandomRobot Feb 20, 2012 07:11 AM

Quote:

Originally Posted by tehpikachu (Post 1336846955)


[IMG]http://tocoairlines.com/sig.jpg[/IMG]


:hmm:

shadow001 Feb 20, 2012 11:57 AM

Quote:

Originally Posted by logical (Post 1336846998)
2 grand in video cards, whats the total system cost? :drool::drool:


Already over 10 000$ with all the water cooling gear quite easily....Heck the CPU's cost me 2400$ and the three 27" displays(2560*1440 resolution), were 2200$....Even the PC case was 500$(Lian LI v2120x).

shadow001 Feb 20, 2012 12:01 PM

Quote:

Originally Posted by demo (Post 1336847071)
Looks like he just screwed the fans to both rads either side?

And nice looking rig shadow :up:


With locking nuts too, but the system isn't fully ready yet....I'll post better pictures once it is, but first i need to rest as my fingers still hurt from tightening all those compression fittings from all the hoses....:lol:

Seyiji Feb 20, 2012 12:52 PM

Quote:

Originally Posted by aRandomRobot (Post 1336847121)
:hmm:

:lol: :up:

Mangler Feb 20, 2012 01:19 PM

Quote:

Originally Posted by shadow001 (Post 1336847356)
With locking nuts too, but the system isn't fully ready yet....I'll post better pictures once it is, but first i need to rest as my fingers still hurt from tightening all those compression fittings from all the hoses....:lol:

This is why I prefer spring clamps, they're easier to work with.

shadow001 Feb 20, 2012 01:37 PM

Quote:

Originally Posted by Mangler (Post 1336847420)
This is why I prefer spring clamps, they're easier to work with.


True, but since compression fittings consist of just 2 parts that don't rely on spring tension to keep them in place, once they're tight(and i mean oh my god my fingers hurt tight here :lol:), it's basically impossible to lose tension, and they can't break like plastic clamps either, and look far better than screw clamps anyday as the pics show it nicely.:D

Roadhog Feb 20, 2012 01:42 PM

Quote:

Originally Posted by shadow001 (Post 1336847433)
True, but since compression fittings consist of just 2 parts that don't rely on spring tension to keep them in place, once they're tight(and i mean oh my god my fingers hurt tight here :lol:), it's basically impossible to lose tension, and they can't break like plastic clamps either, and look far better than screw clamps anyday as the pics show it nicely.:D

I prefer High pressure fuel line clamps.


AdamK47 Feb 20, 2012 02:16 PM

Quote:

Originally Posted by shadow001 (Post 1336846892)
The beast has awoken, but not quite ready yet as i have more wiring work to do, still it took me amost 3 days of work to get it to this point, wich included a lot of mesuring and modding to simply be able to fit everything....Pictures come first:





The 4 HD7970's, water cooled and ready to rock.....:D





2 extra punps besides the one already built into the reservoir itself located on a 5 1/4 bay, so that makes 3 pumps not just for extra flow but also redundancy.





The modifed radiator sandwich this time with 5 fans and i replaced a pair of 120mm by a pair of 140 mm that have high static pressure, and also the flow is improved because i removed some 90* fittngs.






It's bled and still got some detailing work to do on the harness, but the brunt of the work is done.....I'll post a final picture once it's all really finished and nice and clean.

For some reason my PC seems cheap and inadequate.

Now whever someone tells me I spend too much money on my PC, I can direct them to your post.

shadow001 Feb 20, 2012 02:31 PM

Quote:

Originally Posted by AdamK47 (Post 1336847484)
For some reason my PC seems cheap and inadequate.

Now whever someone tells me I spend too much money on my PC, I can direct them to your post.


Given the system you run, that's quite a compliment indeed....I saw the hard ocp pictures of you system recently....:up:


All times are GMT -5. The time now is 03:17 AM.

Powered by vBulletin® Version 3.6.5
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All trademarks used are properties of their respective owners. Copyright 1998-2011 Rage3D.com